Diesel generator sets
Introduction
A generator set or, more specifically, motor generator set is a machine that drives an electrical generator through an internal combustion engine. It is called turbogenerator group in case the alternator is connected to the shaft "Shaft (mechanical)") of a steam turbine or gas turbine, instead of to the crankshaft of an internal combustion engine.
Generating sets are usually used when electricity generation somewhere is insufficient or when power outages are frequent. Likewise, the legislation of different countries may require the installation of a generator set in places where there are high densities of people, such as hospitals, data centers, shopping centers, restaurants, prisons, administrative buildings, etc.
One of the most common uses is to generate electricity in those places where there is no electricity supply. They are generally remote areas with little infrastructure and very little inhabited. Another case would be in public places: hospitals, factories, etc., places where the electrical energy from the network is insufficient and another source of alternative energy is necessary to supply it.
Overview
Contenido
Un grupo electrógeno consta de las siguientes partes:.
Cuando el grupo se encuentra en un lugar muy apartado del operario y funciona las 24 horas del día es necesario instalar un mecanismo para restablecer el combustible gastado. Consta de los siguientes elementos:.
Cuando las condiciones de frío en el ambiente son intensas se dispone de un dispositivo calefactor denominado resistencia de precaldeo que ayuda al arranque del motor. Los grupos electrógenos refrigerados por aire suelen emplear un radiador eléctrico, el cual se pone debajo del motor, de tal manera que mantiene el aceite a una cierta temperatura. En los motores refrigerados por agua la resistencia de precaldeo va acoplada al circuito de refrigeración, esta resistencia se alimenta de 220 VCA y calienta el agua de refrigeración para calentar el motor. Esta resistencia dispone de un termostato ajustable; en él seleccionamos la temperatura adecuada para que el grupo arranque en breves segundos.